2-channel analog output terminal 0 10 V, manual/automatic operation

Categories: ,


The analog KM4602 output terminal has two potential-free analog 0 to 10 V outputs. Both are connected internally to common ground. For each channel a switch enables selection between automatic or manual mode. In automatic mode an analog value is issued depending on the process data. With the manual switch settings the value set via the potentiometer is applied to the output. For manual mode a 24 V supply is required for the Bus Coupler. The switch state can be read by the controller.


Data Sheet: KM4602en


There are no reviews yet.

Be the first to review “KM4602”