Power supply terminal with fuse and diagnostics, 230 V AC.

Categories: ,


The KL9260 power feed terminal makes it possible to set up various potential groups with the standard voltage of 230 V AC (120 V AC). In order to monitor the supply voltage, the terminal with diagnostics reports the status of the power feed terminal to the Bus Coupler through two input bits. It is thus possible for the controller to check the distributed peripheral voltage over the fieldbus.

Technical data KL9260
Nominal voltage 120/230 V AC
Current load ≤ 10 A
Integrated fine-wire fuse …6.3 A
Diagnostics yes
Power LED green
Defect LED red
Reported to K-bus yes
PE contact yes
Shield connection
Renewed infeed
Connection facility to additional power contact 1
K-bus, looped through yes
Bit width in the process image 2
Electrical connection to DIN rail
Current consumption K-bus typ. 10 mA
Electrical isolation yes
Housing width 12 mm
Special features integrated fuse
Weight approx. 55 g
Side by side mounting on Bus Terminals with power contact yes
Side by side mounting on Bus Terminals without power contact yes
Operating/storage temperature 0…+55 °C/-25…+85 °C
Approvals/markings CE, UL, ATEX, DNV GL
Ex marking II 3 G Ex nA IIC T4 Gc



Housing data KL-12-6pin
Design form compact terminal housing with signal LEDs
Material polycarbonate
Dimensions (W x H x D) 12 mm x 100 mm x 70 mm
Installation on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of double slot and key connection
Marking labeling of the BZxxx series
Wiring solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver
Connection cross-section s*: 0.08…2.5 mm²,
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm²
Connection cross-section AWG s*: AWG 28…14,
st*: AWG 28…14,
f*: AWG 26…16
Stripping length 8…9 mm
Current load power contacts Imax: 10 A


Data Sheet: KL9260


There are no reviews yet.

Be the first to review “KL9260”